The device is used to exhaust and filter air in workshops where mechanical (non-explosive) impurities need to be extracted. The extractor can be suspended under the ceiling or placed right on the workbench. The device can be controlled directly on its panel or with a remote control (included). You can set 3 levels of ventilation speed (780/875/960 rpm – 15.75/19.89/39.58 m³/min) and a timer (device switch off after 1, 2 or 4 hours – e.g. after shift end). Two-stage filtration. Easy filter handling. The internal filter can be cleaned with compressed air or washed. Quiet operation (63/66/68 dB). Power supply 230 V/50 Hz/150 W.
It filters out 98 % of particles of up to 5 microns (external filter) and up to 85 % of particles of up to 1 micron (internal filter). In a common room with an area of 50 m², there is filters the air within approx. 5 minutes – therefore, more than 10 times an hour.