A jig for cutting small parts on table saw with a standard 3/4" × 3/8" ( 19 × 9.5 mm ) long guide with closest edge 63.5 mm away or farther from saw blade. Great for perpendicular cuts. T-groove for attaching the clamps. Both ends of the workpiece are supported by the jig with zero backlash, which decreases the risk of the cut-off material getting stuck in the saw blade. The left side of the cutting clutches is equipped with a plastic bevelled ramp, which ensures that cut-off parts fall away form the blade disk. A sliding fence, which limits movement of the tool in the direction of the cut is included. A see-through plastic cover for the saw blade is also included. The back and the front perpendicular guide has aluminium profiles with a T-stop attached for attaching clamps, fences etc. (these are not included ).
Dimensions without the cover and guide bar ( width × length × height ) 305 × 185 × 80 mm
The tool is made of a laminated MDF, aluminium and plastic
- Tool with saw blade cover
- Guide bar – (attached to the tool according to the table saw used)
- Fence into the groove